Brush-on Glaze C2C Black, Glossy 500 g
The C2C glaze series is developed according to the Cradle to Cradle principle - a global certification inspired by nature, where the excess material from a product does not have an obstructive effect on the natural cycle.
The glazes are approved for contact with food and can be machine washed.
Use: Shake or stir the glaze before use. If the glaze has been left without stirring for a long time, some of the water may have evaporated. As the brush-on glazes are water-based, they can be diluted with a little water. In case of overdose of water, the brush properties deteriorate.
Brush the glaze with a soft brush on the bisquit fired item. Start with the large surfaces, let the glaze dry for a while and then apply a new layer of glaze. Brush on 2-3 layers in both vertical and horizontal direction to get a good coverage without visible brush strokes.
Shake well! With 1-2 brush strokes, semi-transparent paints are obtained while opaque paints are achieved with 3 coats (1 min drying time in between).