Welcome to Cebex!

Please help us give you the correct information during your visit, your choice below affects VAT and shipping methods.

Private customer

Corporate customer

Public sector

I am a returning customer.
E-Mail Address:
Password forgotten? Click here.

Earthenware Glaze 1019 White, Glossy 100 g

A white opaque glaze with fine opacity. The glaze has a good melting at 1020 °C. Suitable for both blue, red and white earthenware clays. On groged clays, the glaze should be fired at 1060 °C to avoid cracking.

Rec. temperature:1020-1240 °C
Specific gravity :45-50°

The glaze powder is mixed with water, for good mixing results we recommend glaze stirrers [325031]. Measure approx. 8 dl water per kg glaze powder and slowly pour the powder into the water while stirring. Adjust glaze powder and amount of water using a hydrometer [324060]. If the glaze has not been used for some time, the specific gravity should be checked before use.

We recommend that transparent and single-colored glazes should be sieved through a sieve with a mesh density of 60 mesh [32522060], however, sieving of effect glazes should be avoided.

The glaze can settle, to avoid this adjusting agent ABM-3 [2858] can be added.

     In stock
 Brush-on Glaze C2C Petroleum, Glossy 500 g
 Round batt  28 cm x 13 mm
 Turning wheel Shimpo Whisper T pin hole
 Earthenware Clay Red 0,2 mm 25%
 Stoneware Glaze 5567 Bright red    100 g
 Round batt  35 cm x 10 mm