Earthenware Glaze 1019 White, Glossy 5 kg
A white opaque glaze with fine opacity. The glaze has a good melting at 1020 °C. Suitable for both blue, red and white earthenware clays. On groged clays, the glaze should be fired at 1060 °C to avoid cracking.
|Rec. temperature||:||1020-1240 °C|
|Specific gravity ||:||45-50°|
The glaze powder is mixed with water, for good mixing results we recommend glaze stirrers . Measure approx. 8 dl water per kg glaze powder and slowly pour the powder into the water while stirring. Adjust glaze powder and amount of water using a hydrometer . If the glaze has not been used for some time, the specific gravity should be checked before use.
We recommend that transparent and single-colored glazes should be sieved through a sieve with a mesh density of 60 mesh , however, sieving of effect glazes should be avoided.
The glaze can settle, to avoid this adjusting agent ABM-3  can be added.