Welcome to Cebex!


Please help us give you the correct information during your visit, your choice below affects VAT and shipping methods.



Private customer

Corporate customer

Public sector

I am a returning customer.
E-Mail Address:
Password:
Password forgotten? Click here.

Earthenware Glaze 3006 Grey with spots 5 kg
[223006-5]

The glaze is creamy white with fine iron dots. Suitable for double glazing over or under another glaze. Make sure that the layer does not get thicker than normal and test burn for unexpected drains. When firing to max. At 1220 °C, the dots melt out and give a reddish-brown colour.

Rec. temperature:1020-1200 °C
Specific gravity :50-55°

The glaze powder is mixed with water, for good mixing results we recommend glaze stirrers [325031]. Measure approx. 8 dl water per kg glaze powder and slowly pour the powder into the water while stirring. Adjust glaze powder and amount of water using a hydrometer [324060]. If the glaze has not been used for some time, the specific gravity should be checked before use.

We recommend that transparent and single-colored glazes should be sieved through a sieve with a mesh density of 60 mesh [32522060], however, sieving of effect glazes should be avoided.

The glaze can settle, to avoid this adjusting agent ABM-3 [2858] can be added.


Option
Quantity:
 
 110:94EUR 
     In stock
 Earthenware Glaze 5119 Cuppergreen, Glossy 5 kg
 Earthenware Glaze 3122 Gray Pearl   2 kg
 Engobe White 21, ready mixed
 Stoneware Clay WMS2502 White w. spots 0,2 mm 20%
 Earthenware Glaze 5116 Ivy-green    5 kg
 Spray separator