Earthenware Glaze 3040 Pistol black, Matt 2 kg

This black, matt glaze is hard to make yourself. Characteristic is the matte surface, which becomes a little shiny if it is glazed too thin.

Rec. temperature:1020 °C
Specific gravity :50°

The glaze powder is mixed with water, for good mixing results we recommend glaze stirrers [325031]. Measure approx. 8 dl water per kg glaze powder and slowly pour the powder into the water while stirring. Adjust glaze powder and amount of water using a hydrometer [324060]. If the glaze has not been used for some time, the specific gravity should be checked before use.

We recommend that transparent and single-colored glazes should be sieved through a sieve with a mesh density of 60 mesh [32522060], however, sieving of effect glazes should be avoided.

The glaze can settle, to avoid this adjusting agent ABM-3 [2858] can be added.

     In stock
 Corderite props 75 mm
 Engobe Black 38, ready mixed
 Decal - Black
 Knife nr. 1
 Corderite props 25 mm
 Engobe Dark blue 34, ready mixed