Stoneware Glaze 1373 Copper Green, Satin 2 kg
A glaze that gives very varying results depending on the thickness of the glaze layer and the firing temperature. The best results are achieved on light, iron-free clays where the glaze becomes light medium green with a slight crystal formation in the surface. On gray clay, the glaze becomes darker green and duller. The glaze is not suitable for dark brown clay types.
|Rec. temperature||:||1220-1260 °C|
|Specific gravity ||:||45-50°|
The glaze powder is mixed with water, for good mixing results we recommend glaze stirrers . Measure approx. 8 dl water per kg glaze powder and slowly pour the powder into the water while stirring. Adjust glaze powder and amount of water using a hydrometer . If the glaze has not been used for some time, the specific gravity should be checked before use.
We recommend that transparent and single-colored glazes should be sieved through a sieve with a mesh density of 60 mesh , however, sieving of effect glazes should be avoided.
The glaze can settle, to avoid this adjusting agent ABM-3  can be added.