Stoneware Glaze 1373 Copper Green, Satin 2 kg

A glaze that gives very varying results depending on the thickness of the glaze layer and the firing temperature. The best results are achieved on light, iron-free clays where the glaze becomes light medium green with a slight crystal formation in the surface. On gray clay, the glaze becomes darker green and duller. The glaze is not suitable for dark brown clay types.

Rec. temperature:1220-1260 °C
Specific gravity :45-50°

The glaze powder is mixed with water, for good mixing results we recommend glaze stirrers [325031]. Measure approx. 8 dl water per kg glaze powder and slowly pour the powder into the water while stirring. Adjust glaze powder and amount of water using a hydrometer [324060]. If the glaze has not been used for some time, the specific gravity should be checked before use.

We recommend that transparent and single-colored glazes should be sieved through a sieve with a mesh density of 60 mesh [32522060], however, sieving of effect glazes should be avoided.

The glaze can settle, to avoid this adjusting agent ABM-3 [2858] can be added.

     In stock
 Stoneware Glaze 4071 Glitter Brown  2 kg
 Felt knobs 10 mm
 Earthenware Glaze 1019 White, Glossy 5 kg
 Staple bricks
 Stoneware Clay KM 0,2 mm 35%
 U.G. Pencils 606 Black